BlastOff Adventures
  • About
  • Travel Reports
    • North America >
      • Canada >
        • Trans Taiga
        • Trans Labrador Highway
        • Newfoundland
      • United States >
        • GoWest!
        • XXX Attack (And the Grety GSA Goose) on the North East BDR
        • Ready, Set, TAT (Trans America Trail)
        • Corner carving in West Virginia
        • Key West, FL
        • Continental Divide
        • Old Line State (Maryland)
        • Second Sunday Sled Rides (SSSR)
    • South America >
      • Patagonian Coddiwomple 2019
      • Ecuador--Calibrating to Zero
      • Ecuador
    • Events >
      • 2019 California Superbike School
      • 2019 Roaming Rally
      • 2016 CLASS Motorcycle School At VIR
      • 2015 Roaming Rally
      • 2016 Pine Barrens 500
      • 2016 SRT Performance Driving Experience at Bondurant Racing School 2016
      • 2014 Void
      • 2014 Altrider's Conserve the Ride
      • 2014 Fundy Adventure Rally
      • 2014 GS Trophy Challenge
      • 2014 Roaming Rally
  • Builds
    • Motorcycles >
      • BMW F700GS Dorito Roulette
      • BMW X-Country Dorito Cool Ranch
      • BMW X-Challenge
      • BMW HP2 Enduro
      • Husqvarna TE 511
      • KTM 625 SXC
      • Yamaha MT-09 Dorrito Jurassic (AKA T-rex)
      • Yamaha WR250R
    • Vehicles >
      • Land Rover Ninety (Defender)
  • Contact

TE511

License Plate Mount

11/22/2014

0 Comments

 
So since I got rid of the rear fender which had the license plate mount on it I needed to do something. I could have mounted it to the piece of rear plastic which was left, but I wanted something a bit cleaner. So back to Sicass racing for a solution. I used their universal KTM plate mount.

It's well made, heavy duty, and they ship it with a lot of screws so you don't need to find your own. Nothing too special about mounting it just line it up so that you have maximum screw coverage and drill some holes and bolt it on....that's pretty much it.
Picture
Picture
Picture
The only other thing you need to know is that right now I don't have a license plate light....I don't do much if any riding at night so I am not going to sweat it. If I decide to put one on though I broke and LED trailer light a while back so I took it apart and it has a small cluster in there that I kept for moments like this. I will try to get a picture of the LED later and post it.

I also picked up an Enduro carry all bag from Wolfman which mounts on the front number plate....it's working out pretty well. Some guys say they don't want the extra weight up high which is not really a concern of mine but I would like to keep the weight off the bars so I don't have to fight the extra weight, so I will just be putting light weight stuff in it.
Picture
0 Comments



Leave a Reply.

Proudly powered by Weebly